Power Supply : 5V/1A, ± 12V/500mA, ±0 to 15V DC (Variable)/500 mA
Function Generator : Sine, Square, Triangle & TTL, 1Hz to more than 200kHz
Clock generator : 10MHz TTL clock.
Fixed TTL (5V) Clocks (4 Nos) : 1KHz, 100Hz, 5Hz, 1Hz
Logic Probe : to detect High/Low level pulses, with bi-colour LEDs to indicate status.
Pulser Switches (4 Nos.) : Debounced output
2 digit 7 - segment display with BCD to 7 - segment decoder.
Input Data Switches : 16 Nos.
Output LED : 16 Nos. Status indicators for High/Low indication
AC Power Supply : 12-0-12V AC, 150mA
Onboard potentiometers : 1K & 1M one each.
Onboard speaker : 8 Ohms, 0.5Watt (1 No.)
Onboard DPM using 16x2 Alphanumeric LCD to display frequency, AC and DC (200 V)
LED BAR graph with 10-LED indicator to display 0-5V input.
Computer Interface Adapter Facilitates connecting trainer to RS232 com port of PC provided with serial cable &
For testing the signal connector is provided.
Output Common Resources Peripherals
DC Variable Supply : 0 to ±15V at 500mA
DC Dual Supply : ±12V
DC Supply : +5V
AC Variable Supply : 12V - 0 - 12V
PC Interface : For Connecting Trainer to Computer
AC Voltmeter : 200V
DC Voltmeter : 200V
Current meter : 200mA
Status LED Indication : 16 LEDs for Indication
Input for Status Indication: 4mm Socket for Input of LED Indication
Output of Data Switches High/Low : 16 Switches for Input
Input Data Switches High/Low : 4mm Socket Output of Switches
BCD to Seven Segment Decoder (X2): 4mm Sockets for A, B, C, D, for Input
100 MHz TTL Clock : 4mm Sockets for Output.
Fixed Clock : 1Hz, 5Hz, 10Hz, 1KHz : 4mm Sockets for Output.
LED Bar Graph : 4mm Socket for Input 5V AC
Speaker Out 8 ohm : 4mm Socket for Speaker Input.
De-bounced Switches : 4mm Socket for Output & GND
Pulser Swtiches : Switches for given input to the
Logic Probe : 4mm Socket for Logic Probe Input & GND
Frequency : to change the frequency (x10) through Potentiometer
Range : Band Switch to change the range 1Hz to 100KHz.
Function : Band Switch to change waveform Sine / Square / Triangle
Amplitude Potentiometer to change the amplitude of waveform
Resistances : Different value resistances for experiments.
Capacitors : Different value Capacitors for experiments.
Resistances / Capacitors (Series / Parallel) : Different value resistances / Capacitors (Series / Parallel) for experiments.
Diodes : Different Diodes for experiments.
Potentiometer : 1MW
Potentiometer : 1KW
Operational Amplifiers : for experiments (supply already given to the Op-Amp.)
16x2 LCD with backlight for display frequency, Voltage, Current etc.
Bread Board